&

加入購物車成功！

產品名稱：Silicone rubber flat cableYGGB
瀏覽：
添加時間：2024-06-07 10:00:24
推薦度：

介紹：

耐高溫180度硅橡膠電纜，硅橡膠扁平電纜生產廠家，硅橡膠扁平控制電纜

High temperature resistant 180 degree silicone rubber cable, manufacturer of silicone rubber flat cable, silicone rubber flat control cable

一、硅橡膠扁電纜特點及用途：

1、 Characteristics and applications of silicone rubber flat cables:

二、硅橡膠扁電纜采用硅橡膠作絕緣或護套材料，由于硅橡膠本身具有耐高溫、耐寒、柔軟、耐磨、防腐等特性，因此該電纜高溫環境下電氣性能穩定，舒緩老化性能好，使用壽命長，適合于交流1KV及以下具有抗拉、耐熱、防腐等特殊要求的行車、臺車、傳輸機械等移動設備和電器用動力傳輸線及控制、照明、通訊線路，硅橡膠扁電纜已廣泛應用于冶金、電力、化工、船舶、港口等行業。該電纜具有良好的柔軟度、防水、耐腐蝕、耐壓等優點。工作溫度為-60℃-180℃。

2、 The silicone rubber flat cable uses silicone rubber as the insulation or sheath material. Because silicone rubber itself has the characteristics of high temperature resistance, cold resistance, softness, abrasion resistance, corrosion prevention, etc., the cable has stable electrical performance, good aging relieving performance, and long service life under high temperature environment. It is suitable for driving, trolley, transmission machinery and other mobile equipment with special requirements of tension, heat resistance, corrosion prevention, etc., and power transmission lines and control, lighting, communication lines for electrical appliances. The silicone rubber flat cable has been widely used in metallurgy, power, chemicals, ships, ports and other industries. This cable has advantages such as good flexibility, waterproofing, corrosion resistance, and pressure resistance. The working temperature is -60 ℃ -180 ℃.

使用特性：

Usage characteristics:

1、額定電壓：UO/U為0.6/1KV；

1. Rated voltage: UO/U is 0.6/1KV;

2、電纜允許工作溫度范圍：硅橡膠絕緣-60℃— 180℃；氟塑料絕緣-60℃－ 200℃；

2. The allowable working temperature range of cables: silicone rubber insulation -60 ℃ -180 ℃; Fluoroplastic insulation -60 ℃ -200 ℃;

3、電纜短路時（長持續間不超過5S）電纜導體的高溫度不超過250℃；

3. When the cable is short circuited (lasting for no more than 5 seconds), the high temperature of the cable conductor shall not exceed 250 ℃;

4、電纜敷設溫度應不低于- 20℃；

4. The cable laying temperature should not be lower than -20 ℃;

5、電纜小彎曲半徑為電纜小邊長度的10倍；

5. The small bending radius of the cable is 10 times the length of the small side of the cable;