加入購物車成功！
- 產品名稱：Silicone rubber high-temperature cableYGCF46R
- 瀏覽：
- 添加時間：2024-06-28 14:13:31
- 推薦度：
本產品適用于交流額定電壓450/750V（YGC額定電壓為0.6/1KV）及以下移動或固定敷設用電器儀表連接線或信號傳輸，電纜具有較好的熱穩定性，能在高溫、低溫、腐蝕性中保持良好的電性能和柔軟性，適合冶金、電力、石化等行業具有移動耐溫等特殊要求場合使用。
This product is suitable for mobile or fixed electrical instrument connection lines or signal transmission with AC rated voltage of 450/750V (YGC rated voltage of 0.6/1KV) and below. The cable has good thermal stability and can maintain good electrical performance and flexibility in high temperature, low temperature, and corrosion. It is suitable for use in industries such as metallurgy, power, and petrochemical with special requirements for mobile temperature resistance.
使用特性 1． 交流額定電壓：U0/U 450/750
Usage characteristics: 1. AC rated voltage: U0/U 450/750
1． 交流額定電壓：U0/U 450/750KV（YGC額定電壓為0.6/1KV）
1. AC rated voltage: U0/U 450/750KV (YGC rated voltage is 0.6/1KV)
***高工作溫度：180℃ http://www.anhdl.com
Maximum working temperature: 180 ℃ http://www.anhdl.com
2． ***低環境溫度：硅橡膠護套：固定敷設-60℃，非固定敷設-20℃
2. Minimum ambient temperature: silicone rubber sheath: fixed laying -60 ℃, non fixed laying -20 ℃
3． 電纜安裝敷設溫度應不低于-20℃。
3. The installation and laying temperature of cables should not be lower than -20 ℃.
4． 電纜允許彎曲半徑：非鎧裝電纜***小為電纜外徑的6倍
4. Permissible bending radius of cables: The minimum allowable bending radius for non armored cables is 6 times the outer diameter of the cable
該電纜具有良好的柔軟度、防水、耐腐蝕、耐壓等優點。
This cable has advantages such as good flexibility, waterproofing, corrosion resistance, and pressure resistance.
2、工作溫度：序號1～4 -60～+200℃
2. Working temperature: serial number 1-4-60~+200 ℃
序號5～14 -15～+105℃
Number 5-14-15+105 ℃
5、絕緣電阻（20℃）不低于50MΩ·km
5. Insulation resistance (20 ℃) not less than 50M Ω· km
6、導體線芯直流電阻（20℃）符合GB3956-97規定
6. The DC resistance of the conductor core (20 ℃) complies with the provisions of GB3956-97
7、無鎧裝電纜允許彎曲半徑不小于電纜外徑的6倍，鎧裝電纜允許彎曲半徑不小于電纜外徑的12倍。
7. Unarmored cables are allowed to have a bending radius not less than 6 times the outer diameter of the cable, while armored cables are allowed to have a bending radius not less than 12 times the outer diameter of the cable.
8、***低安裝敷設溫度：序號1～4 -45℃
8. Minimum installation and laying temperature: serial number 1-4-45 ℃
