&

加入購物車成功！

產品名稱：Fluoroplastic high-temperature cableAFFR
瀏覽：
添加時間：2024-07-11 10:05:05
推薦度：

介紹：

AFFR-3*1.5氟塑料耐高溫電纜（260°）

AFFR-3 * 1.5 fluoroplastic high-temperature resistant cable (260 ° C)

本產品適用于冶金、石油、化工以及發電廠等工礦企業，在高溫條件下和惡劣環境中（如酸、堿、油水低溫條件）作為各

This product is suitable for industrial and mining enterprises such as metallurgy, petroleum, chemical industry, and power plants. It can be used in high temperature conditions and harsh environments (such as acid, alkali, and oil-water low temperature conditions)

及自動裝置之連接線，供交流額定電壓450/750伏及以下控制、監控及保護電路行裝場合下使用。

The connecting wires for automatic devices are used in control, monitoring, and protection circuit installations with rated AC voltage of 450/750 volts and below.

AFFR-3*1.5氟塑料耐高溫電纜（260°）

AFFR-3 * 1.5 fluoroplastic high-temperature resistant cable (260 ° C)

1．成品電纜導體直流電阻(符合GB3956規定)參照附錄A表1。

1. The DC resistance of the finished cable conductor (in accordance with GB3956) shall refer to Table 1 in Appendix A.

2．20℃時絕緣電阻不小于500MΩ/KM，180℃時絕緣電阻不小于10MΩ/KM

At 2.20 ℃, the insulation resistance shall not be less than 500M Ω/KM, and at 180 ℃, the insulation resistance shall not be less than 10M Ω/KM

3．成品電纜經受交流50HZ3.5KV/5min電壓試驗不擊穿。

3. The finished cable shall withstand an AC voltage test of 50Hz, 3.5KV, and 5min without breakdown.

AFFR-3*1.5氟塑料耐高溫電纜（260°）

AFFR-3 * 1.5 fluoroplastic high-temperature resistant cable (260 ° C)

一：產品特點及用途

1： Product features and uses

本產品適用于交流額定電壓0.6/1KV及以下作固定敷設用輸配線路、動力傳輸或電機引接線，具有耐高溫、耐腐蝕、耐酸

This product is suitable for fixed laying of transmission and distribution lines, power transmission or motor leads with rated AC voltage of 0.6/1KV and below. It has high temperature resistance, corrosion resistance, and acid resistance

體、防水等特性，高溫環境電氣性能穩定，載流量大，使用壽命長，廣泛用于冶金、電力、石化、大型建筑、汽車制造等

Featuring physical and waterproof properties, stable electrical performance in high-temperature environments, high current carrying capacity, and long service life, it is widely used in metallurgy, power, petrochemicals, large-scale construction, automobile manufacturing, etc

二：產品執行標準

2： Product execution standards

Q/HHTZH001.2

阻燃耐火特性試驗執行GB12666-90標準

The flame retardant and fire resistance characteristics test shall comply with the GB12666-90 standard

三：使用特性

3： Usage characteristics

1．交流額定電壓：U0/U 0.6/1KV

1. AC rated voltage: U0/U 0.6/1KV

可溶性聚四氟乙烯(PFA)絕緣不超過260℃

Soluble polytetrafluoroethylene (PFA) insulation not exceeding 260 ℃

3． zui低環境溫度：氟塑料絕緣和護套

3. Low ambient temperature: fluoroplastic insulation and sheath

固定敷設-40℃，非固定敷設-15℃

Fixed laying -40 ℃, non fixed laying -15 ℃

4．電纜安裝敷設溫度應不低于0℃(氟塑料、硅橡膠和丁晴護套電纜不低于-25℃)。

4. The installation and laying temperature of cables should not be lower than 0 ℃ (fluoroplastic, silicone rubber, and nitrile sheathed cables should not be lower than -25 ℃).

5．電纜允許彎曲半徑：?jiǎn)涡倦娎|zui小為電纜外徑的15倍

5. Cable allowable bending radius: The minimum radius of a single core cable is 15 times the outer diameter of the cable

多芯電纜zui小為電纜外徑的10倍

Multi core cables have a minimum diameter of 10 times the outer diameter of the cable

四：基本型號及名稱

4： Basic model and name

型號 產品名稱正常使用溫度℃

Model Product Name Normal Operating Temperature ℃

FF46 氟塑料絕緣和護套電力電纜 -60-200

FF46 fluoroplastic insulated and sheathed power cable -60-200

FF46-22 氟塑料絕緣和護套鋼帶鎧裝電力電纜 -60-200

FF46-22 fluoroplastic insulated and sheathed steel tape armored power cable -60-200