加入購物車成功!
一, JGG-10KV硅橡膠高壓電機引出線用途: JGG-10KV硅橡膠高壓電機引出線具有耐高低溫、耐潮濕、耐老化、耐
1、 JGG-10KV silicone rubber high-voltage motor lead out purpose: The JGG-10KV silicone rubber high-voltage motor lead out has high and low temperature resistance, moisture resistance, aging resistance, and durability
射等特點,適用于絕緣電機、電器引接線等。
Suitable for insulated motors, electrical wiring, etc. due to its shooting characteristics.
二, JGG-10KV硅橡膠高壓電機引出線使用條件及執行標準:執行標準Q/VAHS 28-2006
2、 JGG-10KV silicone rubber high-voltage motor lead wire usage conditions and implementation standards: Implementation standard Q/VAHS 28-2006
使用條件:(1) 長期允許工作溫度范圍:-60~ 180℃
Usage conditions: (1) Long term allowable working temperature range: -60~180 ℃
(2) 安裝zui小彎曲半徑:不小于電纜外徑的10倍。
(2) Installation minimum bending radius: not less than 10 times the outer diameter of the cable.
三, JGG-10KV硅橡膠高壓電機引出線型號及名稱,技術參數表:
3、 JGG-10KV silicone rubber high-voltage motor lead wire model and name, technical parameter table:
型 號 名 稱 主要用途
Main purpose of model name
JG、JHXG 硅橡膠絕緣引接線 用于1140V及以下的F級,H級絕緣電機和電器引接線
JG and JHXG silicone rubber insulated lead wires are used for F-class and H-class insulated motors and electrical lead wires with 1140V and below
JGG 硅橡膠絕緣高壓引接線 用于6000V-10000V之間的絕緣電機、電器用引接線
JGG silicone rubber insulated high-voltage lead wire is used for insulated motor and electrical lead wires between 6000V-10000V