&

加入購物車成功！

產品名稱：TVVBPG-TV elevator specific flat cable
瀏覽：
添加時間：2024-08-07 15:49:21
推薦度：

介紹：

TVVBPG-TV 電梯專用屏蔽射頻網絡隨行電梯專用扁電纜導體超柔性軟導體，特軟抗衰減絕緣，屏蔽層密度100%，護套柔軟耐磨抗拉抗撕裂，外加鍍鋅加強型鋼絲。 TVVBPG-TV 電梯專用屏蔽射頻網絡隨行電梯專用扁電纜的特性是保持電梯在運行過程中電纜來回移動，

TVVBPG-TV elevator specific shielded RF network accompanying elevator specific flat cable conductor ultra flexible soft conductor, specially soft and anti attenuation insulation, shielding layer density of 100%, sheath soft, wear-resistant, tensile and tear resistant, externally reinforced with galvanized steel wire. The characteristic of TVVBPG-TV elevator specific shielded RF network accompanying elevator specific flat cable is to keep the cable moving back and forth during the operation of the elevator,

TVVBPG-TV elevator specific shielded RF network accompanying elevator specific flat cable conductor ultra flexible soft conductor, specially soft and anti attenuation insulation, shielding layer density of 100%, sheath soft, wear-resistant, tensile and tear resistant, externally reinforced with galvanized steel wire. The characteristic of TVVBPG-TV elevator specific shielded RF network and accompanying elevator specific flat cable is to maintain good communication effect while keeping the cable moving back and forth, bending, and the network cable bearing gravity during the operation of the elevator.

一、適用范圍

1、 Scope of application

TVVBPG 本產品適用于交流額定電壓300/500V（或450/750V）及以下電梯和升降機械設備等，作電源動力連接線用。

TVVBPG is suitable for elevators and lifting machinery equipment with AC rated voltage of 300/500V (or 450/750V) and below, as a power connection line.

二、執行標準

2、 Execution standards

QB/WB2008-6及補充要求

QB/WB2008-6 and Supplementary Requirements

三、使用特性

3、 Usage characteristics

1、電纜導體的長期允許工作溫度不超過120℃，敷設環境溫度應不低于0℃。

1. The long-term allowable working temperature of cable conductors should not exceed 120 ℃, and the laying environment temperature should not be lower than 0 ℃.

2、安裝自由懸掛長度不超過80m，移動速度不超過4m/s。

2. Install a free suspension with a length not exceeding 80m and a moving speed not exceeding 4m/s.

3、電纜敷設安裝允許彎曲半徑應不小于電纜小邊的6倍。

3. The allowable bending radius for cable laying and installation should not be less than 6 times the small edge of the cable.