加入購物車成功!
產品簡介
Product Introduction
BPYJVPX13R變頻電纜詳細介紹 該產品具有很強的耐變頻引起的脈沖電壓沖擊性能,并且具有優異電磁屏蔽性能,可抗電磁干擾,確保系統安全可靠運行。同時,我公司能夠根據用戶和特殊環境使用需要,能設計制造具有低煙無鹵、阻燃、耐火等性能的特種變頻器用電纜。該產品適用于10kV及以下變頻控制系統中作為輸配電或電氣連接用。
BPYJVPX13R frequency conversion cable detailed introduction: This product has strong resistance to pulse voltage impact caused by frequency conversion, and excellent electromagnetic shielding performance, which can resist electromagnetic interference and ensure safe and reliable operation of the system. At the same time, our company can design and manufacture special frequency converter cables with low smoke and halogen-free, flame retardant, fire-resistant and other properties according to the needs of users and special environments. This product is suitable for use as a transmission and distribution or electrical connection in 10kV and below frequency conversion control systems.
BPYJVPX13R變頻電纜詳細介紹
BPYJVPX13R Variable Frequency Cable Detailed Introduction
變頻電機電纜
Variable frequency motor cable
一、適用范圍
1、 Scope of application
該產品具有很強的耐變頻引起的脈沖電壓沖擊性能,并且具有優異電磁屏蔽性能,可抗電磁干擾,確保系統安全可靠運行。同時,我公司能夠根據用戶和特殊環境使用需要,能設計制造具有低煙無鹵、阻燃、耐火等性能的特種變頻器用電纜。該產品適用于10kV及以下變頻控制系統中作為輸配電或電氣連接用。
This product has strong resistance to pulse voltage impact caused by frequency conversion, and excellent electromagnetic shielding performance, which can resist electromagnetic interference and ensure the safe and reliable operation of the system. At the same time, our company can design and manufacture special frequency converter cables with low smoke and halogen-free, flame retardant, fire-resistant and other properties according to the needs of users and special environments. This product is suitable for use as a transmission and distribution or electrical connection in 10kV and below frequency conversion control systems.
二、執行標準
2、 Execution standards
本產品執行企業標準Q/320282 BND 017-2007。
This product complies with the enterprise standard Q/320282 BND 017-2007.
三、變頻電機電纜型號
3、 Variable frequency motor cable model
BPYJVPP2 交聯聚乙烯絕緣銅絲編織分相屏蔽、銅帶總屏蔽聚氯乙烯護套同心式變頻電纜
BPYJVPP2 Cross linked Polyethylene Insulated Copper Wire Braided Phase Separation Shielding, Copper Strip Total Shielding, PVC Sheath Concentric Variable Frequency Cable
BPYJVP2P2 交聯聚乙烯絕緣銅帶分相屏蔽、銅帶總屏蔽聚氯乙烯護套同心式變頻電纜
BPYJVP2P2 Cross linked polyethylene insulated copper tape phase shielding, copper tape total shielding, PVC sheathed concentric frequency conversion cable
BPYJVP1P2 交聯聚乙烯絕緣銅絲、銅帶疏繞分相屏蔽、銅帶總屏蔽聚氯乙烯護套同心式變頻電纜
BPYJVP1P2 Cross linked polyethylene insulated copper wire, copper tape sparse winding phase shielding, copper tape total shielding, PVC sheathed concentric frequency conversion cable
BPYJVPP2-22 交聯聚乙烯絕緣銅絲編織分相屏蔽、銅帶總屏蔽聚氯乙烯護套同心式變頻電纜
BPYJVPP2-22 Cross linked polyethylene insulated copper wire braided phase separated shielding, copper tape total shielding, PVC sheathed concentric frequency conversion cable
BPYJVP2P2-22 交聯聚乙烯絕緣銅帶分相屏蔽、銅帶總屏蔽聚氯乙烯護套同心式變頻電纜
BPYJVP2P2-22 Cross linked polyethylene insulated copper tape phase shielding, copper tape total shielding, PVC sheathed concentric frequency conversion cable
BPYJVP1P2-22 交聯聚乙烯絕緣銅絲、銅帶疏繞分相屏蔽、銅帶總屏蔽鋼帶鎧裝型聚氯乙烯護套同心式變頻電纜鋼帶鎧裝型
BPYJVP1P2-22 Cross linked polyethylene insulated copper wire, copper tape sparse winding phase shielding, copper tape total shielding, steel tape armored type, PVC sheathed concentric frequency conversion cable, steel tape armored type
四、使用特性
4、 Usage characteristics
1、 電纜導體允許*工作溫度為:90℃。
1. The allowable working temperature for cable conductors is 90 ℃.
2 、電纜導體允許短路溫度為:不超過250℃,持續時間不超過5秒。
2. The allowable short-circuit temperature for cable conductors is: not exceeding 250 ℃, with a duration not exceeding 5 seconds.
3 、電纜敷設環境溫度應不低于0℃,低于0℃應預先加溫。
3. The temperature of the cable laying environment should not be lower than 0 ℃, and if it is lower than 0 ℃, it should be preheated.
4 、電纜敷設時zui小彎曲半徑:軟結構導體電纜不小于8倍電纜外徑;硬結構導體電纜不小于15倍電纜外徑
4. The minimum bending radius for cable laying is not less than 8 times the outer diameter of the soft structure conductor cable; Hard structured conductor cables shall not be less than 15 times the outer diameter of the cable